Parts code | Parts name |
---|
11401 | BLOCK SUB-ASSY, CYLINDER |
11401C | FLANGE(FOR WATER BY-PASS) |
11401G | SENSOR, CRANK POSITION |
11402 | CRANKCASE SUB-ASSY |
11416 | BOLT(FOR CRANKSHAFT BEARING CAP SET) |
11417B | INSULATOR, CRANKCASE |
11431A | PLUG, TIGHT, NO.1(FOR CYLINDER BLOCK) |
11431B | PLUG, TIGHT, NO.2(FOR CYLINDER BLOCK) |
11431C | PLUG, TIGHT, NO.3(FOR CYLINDER BLOCK) |
11431D | PLUG, TIGHT, NO.4(FOR CYLINDER BLOCK) |
11431E | PLUG, TIGHT, NO.5(FOR CYLINDER BLOCK) |
11431F | PLUG, TIGHT, NO.6(FOR CYLINDER BLOCK) |
11432A | PLUG, W/HEAD TAPER SCREW, NO.1 |
11432G | PLUG, W/HEAD STRAIGHT SCREW, NO.5 |
11432R | PLUG, W/HEAD STRAIGHT SCREW, NO.1(FOR CYLINDER BLOCK) |
11432T | PLUG, W/HEAD STRAIGHT SCREW, NO.3(FOR CYLINDER BLOCK) |
11432U | GASKET, STRAIGHT SCREW PLUG NO.1(FOR CYLINDER BLOCK) |
11432W | GASKET, STRAIGHT SCREW PLUG NO.3(FOR CYLINDER BLOCK) |
11434C | PIN, STRAIGHT (FOR CYLINDER HEAD SET) |
11434D | PIN, STRAIGHT(FOR ENGINE REAR OIL SEAL) |
11434G | PIN, STRAIGHT(FOR END PLATE) |
11434X | PIN, RING(FOR CHAIN CACE) |
11448 | ORIFICE, CYLINDER BLOCK OIL |
11452 | GUIDE, OIL LEVEL GAGE |
12101 | PAN SUB-ASSY, OIL |
12101A | PLUG(FOR OIL PAN DRAIN) |
12101B | GASKET(FOR OIL PAN DRAIN PLUG) |
12112 | PAN, OIL NO.2 |
12151 | GASKET, OIL PAN |
12180B | CAP ASSY, OIL FILLER |
12180C | GASKET, OIL FILLER CAP |
12272A | CAP, OIL SEPARATOR |
12273A | GASKET, OIL SEPARATOR |
12581A | INSULATOR, CYLINDER BLOCK, NO.1 |