English / 
JapaneseJavaScript is off.
You need to have JavaScript enabled in your browser.
You need to have JavaScript enabled in your browser.
| Parts code | Parts name |
|---|---|
| 11401 | BLOCK SUB-ASSY, CYLINDER |
| 11401C | FLANGE(FOR WATER BY-PASS) |
| 11401G | SENSOR, CRANK POSITION |
| 11415 | COCK SUB-ASSY, WATER DRAIN(FOR CYLINDER BLOCK) |
| 11415A | PLUG, WATER DRAIN COCK(FOR CYLINDER BLOCK) |
| 11416 | BOLT(FOR CRANKSHAFT BEARING CAP SET) |
| 11431A | PLUG, TIGHT, NO.1(FOR CYLINDER BLOCK) |
| 11431B | PLUG, TIGHT, NO.2(FOR CYLINDER BLOCK) |
| 11431C | PLUG, TIGHT, NO.3(FOR CYLINDER BLOCK) |
| 11431D | PLUG, TIGHT, NO.4(FOR CYLINDER BLOCK) |
| 11431E | PLUG, TIGHT, NO.5(FOR CYLINDER BLOCK) |
| 11432G | PLUG, W/HEAD STRAIGHT SCREW, NO.5 |
| 11432L | PLUG, W/HEAD STRAIGHT SCREW, NO.4(FOR CYLINDER BLOCK) |
| 11432S | PLUG, W/HEAD STRAIGHT SCREW, NO.2(FOR CYLINDER BLOCK) |
| 11432T | PLUG, W/HEAD STRAIGHT SCREW, NO.3(FOR CYLINDER BLOCK) |
| 11432U | GASKET, STRAIGHT SCREW PLUG NO.1(FOR CYLINDER BLOCK) |
| 11432W | GASKET, STRAIGHT SCREW PLUG NO.3(FOR CYLINDER BLOCK) |
| 11434C | PIN, STRAIGHT (FOR CYLINDER HEAD SET) |
| 11434D | PIN, STRAIGHT(FOR ENGINE REAR OIL SEAL) |
| 11434G | PIN, STRAIGHT(FOR END PLATE) |
| 11448 | ORIFICE, CYLINDER BLOCK OIL |
| 11452 | GUIDE, OIL LEVEL GAGE |
| 11459 | SUPPORT, OIL LEVEL GAGE GUIDE |
| Parts code | Parts name |
|---|---|
| 12101 | PAN SUB-ASSY, OIL |
| 12101A | PLUG(FOR OIL PAN DRAIN) |
| 12101B | GASKET(FOR OIL PAN DRAIN PLUG) |
| 12112 | PAN, OIL NO.2 |
| 1301 | Ref to |
| 1501 | Ref to |
| 1503 | Ref to |
| 15301 | GAGE SUB-ASSY, OIL LEVEL |
| 15605 | VALVE SUB-ASSY, OIL CHECK |
| 15708 | NOZZLE SUB-ASSY, OIL, NO.1 |
| 1601 | Ref to |
| 9011006034 | ** Std part |
| 9011906888 | ** Std part |
| 9017906299 | ** Std part |
| 9020114099 | ** Std part |
| 9043010027 | ** Std part |
| 9043014235 | ** Std part |
| 9162160614 | ** Std part |
| 91621J0612 | ** Std part |
| 9164580620 | ** Std part |
| 9338516010 | ** Std part |